Top 3 Trailer Hitch Installation Near You | Moving Feedback (2024)

U-Haul, Pep Boys, and Amazon Home Services are the best at installing tow hitch on trucks or cars because their services cut across the nation.Professional trailer hitch installation would cost you over a hundred bucks, but doing the installation by yourself is very popular and not too difficult.

However, trailer hitch installation could get complicated with certain types of hitch, as well as some cars. You can get installation services from local vehicles and repair shops; you only need to find the one nearest to you.

Hitch installation is also available with the majority of vehicle dealerships but at costly prices.

Top 3 Trailer Hitch Installation Service Provider In The USA

Companies like Amazon, U-Haul, or Pep Boys will work the majority of hitch installation jobs because many trailer hitch installation works are very straightforward.

The only factors that complicate trailer hitch installation are the brand and model of your car, the total weight you want to tow, and the compatibility of your car with standard hitches.

Here are the tow hitch installers you can hire:

  1. U-Haul
  2. Amazon Relocaton
  3. Pep Boys

How Much Does it Cost to Install a Trailer Hitch?

There are little calculations to do before you can determine the cost for the tow hitch installation The cost can quickly increase when you calculate the costs for hitch ball, wiring, the hitch itself, and other important accessories.

The service fee is also another cost to consider, and it varies from one shop to another. The cost is determined by the type of trailer hitch, your car’s make and model, and the amount of elbow grease needed by the installation.

For example, some cars require drilling to allow space for the trailer hitch hole; others do not require drilling installation. The cost can vary based on the type of hitch you are installing.

The cost of the bumper-towing models containing a hole located in the bumper for the trailer ball is between$8 and $35. If not done before, wiring installation will also be required for the trailer lights, and it costs between$15 and $50. This type of tow hitch does not fit to your vehicle’s chassis.

The price for mounting a receiver hitch to your car’s chassis starts from$50 to $250. The installation cost starts at $50 as well. The cost of fifth wheel hitches is between$200 and $500.

You will be paying between$200 and $500for a new gooseneck tow hitch. The total cost with the installation costs can amount to$400 to $800.

Below is the auto parts needed for installation of a tow hitch as well as our best picks:

  • Receiver:Placed to the vehicle’s frame and accepts a ball mount by providing a receiver tube.
  • Ball Mount:This provides support for a trailer ball by sliding into the opening. It is a metal tube that can be removed.
  • Hitch Ball:The hitch ball is of different sizes such as 1-7/8”, 2”, 2-5/16”, and 3, and it is joined to the ball mount.
  • Pin & Clip:This is a steel pin which seals the ball mount to the hitch tube.
  • Wiring:This joins your trailer’s lights to the tow car. They majorly function as a brake light.

Here are little examples of common tow hitch and their prices:

  • RAM Laramie 2500:Class V Rear Receiver Hitch costs $360
  • Hyundai Santa Fe:Class III Rear Receiver Hitch costs $265-$395
  • Mazda CX-9:Class II Rear Receiver Hitch costs $239
  • Toyota Sienna:Class III Rear Receiver Hitch costs $245-$275
  • Honda Odyssey:Class III Rear Receiver Hitch costs $240-$290
  • Toyota RAV4:Rear Receiver Hitch costs $225-$275

What is included in Professional Hitch Installation?

With professional tow hitch installers, you will get everything you need, including parts and installation service.

Below are the services available with professional hitch installers:

  • Compatibility test between hitch-to-car
  • Mounting of hitch onto your vehicle and tightening of bolts
  • Drilling of holes if needed during installation
  • Testing and reviewing of the safety of tow hitch after installation.

You are paying for the correct and safe installation of your tow hitch when you hire a professional installer. This is better than having an amateur do it, and your expensive ATVs or boat unhitched while in transit.

Can I perform a DIY Tow Hitch Installation?

Yes, if you know what you are doing. The installation tips in this article will help you greatly in saving some cash and also develop a new skill.

However, you have to consider the wiring and connection of your car to your tow trailer’s brake light to serve as a signal, as it may get you confused. This is one of the reasons you need a professional.

You can contact a professional when it all seems out of your knowledge. You have to prioritize your safety and not your DIY project. Call your car dealer, and staff from an auto shop, or your mechanic.

Steps Involved in DIY Installation of Tow Hitch

Although the installation of tow hitch is said to be simple, when it comes to practice, the type of tow hitch involved and your car could make the whole process tiring.

Below are the six simple steps to install a standard tow hitch:

1. Know your Numbers

You have to figure out how much weight your car can tow before you decide on the right trailer hitch to buy. You don’t want to drill a tow hitch specially made for heavy-duty trucks onto the back of your vehicle.

Your towing capacity is always stated in your car manual. You can also call your car dealership or do a little search onGoogle.

You will be able to pick the right trailer hitch when you know your towing capacity, as it also helps you know how much weight you can use the hitch to tow.

2. Prepare your Workspace

Make sure the necessary equipment is on the ground before you start the tow hitch installation work. This will be determined by your car and the type of hitch you want to use. You can consult your manual to know the hitch installation equipment you need.

Below is the necessary equipment to have with you for most tow hitch installations:

  • Wire tube brush
  • Lubricant
  • C-clamp
  • Torque wrench
  • Wheel chocks
  • Pin and clip
  • Power drill (if no hole on your car)

If you bought a new tow hitch, then you may find bolts, washers, and manuals inside it.

3. Prepare your Car

Make sure your car is clean, secured, and free of any obstacles before you move your hitch into position. Follow the following steps:

  • Switch to your parking brake:This will first prevent rolling.
  • Inspect your wheels:Place two wed in between both rear tires to prevent your vehicle from rolling. You can also place chock wheels on the other side of the vehicle for peace of mind.
  • Bring out the spare tire:This depends on your vehicle’s spare lives.
  • Jack your vehicle:This is not necessary, but it gives you more space to work.
  • Take away any plugs or bolts from your vehicle:You will be required to remove some parts or pieces from your vehicle to give space for the tow hitch. Check its necessity on your instructions.
  • Clean thoroughly:Clean the holes in your car you plan to look into using a wire tube brush plus a lubricant. Don’t use a toothbrush as it won’t get the job done as the recommended wire tube brush.
  • Drill holes:You may need to drill holes on your car or truck if there is none on it for mounting and installation of the hitch. Drill installation does not come with some tow hitches, such as the “Curt.”

4. Attach the Hitch

Now, you can attach your hitch to your car. Below is the procedure:

  • Lift the hitch into its place:You may need the assistance of a friend with the lifting. Fix the hitch to the frame of your car C-clamps to hold it in position
  • Tighten the bolts:Tighten the bolt just enough to hold the hitch in place. Do not worry about torqueing at this stage; first, tighten the other side of the hitch.

5. Tighten the Bolts

Use your fingers to tighten the bolts as much as you can once you have attached your hitch and make sure they are all in position. You can then use your torque wrench to tighten the bolts to the figure you will find in the manual of your tow hitch. Lastly, it’s time to connect your wiring to your trailer’s brake light and switch on signals.

6. Double-check what you did

To test how secure your tow hitch is, shake, wiggle and tug on it. Also, inspect your brake and switch on the signals to be sure of the soundness of your wiring.

Make sure your tow hitch is correctly installed before you attempt to tow anything. You can also invite a professional hitch installer to inspect your work for reassurance.

FAQs

What is the cost of installing a hitch?

The labor rates of the installer and how difficult the installation is will determine the actual cost of a professional hitch installation but can cost between $50 and $250. The comprehensiveness of hitch installations is from one level to another, which increases the cost as working hours.

How much time does it take to install a hitch?

Hitch installation can be done within 30 minutes or a few hours or more, depending on the condition of your car, the professionalism of the installer, and the equipment being used. Consult your installation manual for your type of hitch for guidance.

Will my warranty turn void when I install a trailer hitch?

No. Trailer hitch installation doesn’t render the vehicle’s warranty void. In 1975, Congress passed the Magnuson-Moss Warranty Act, which makes sure consumers can install parts from aftermarkets without being scared of nullifying their warranty.

However, the installation must be correctly done. Coverage will not be provided for improper installation, such as the usage of different hardware, too much closeness between drilled holes for the bolt, and so on.

How is a trailer hitch attached?

Enlist the help of a friend for the lifting of the hitch into position to attach it to your vehicle. You can use a wire or rope of appropriate length to hang the hitch from the frame of your car if there is no one available to help.

As the tow hitch suspends above ground level, start threading the mounting bolts till the hitch gets to its right position without help. Proceed by torquing the bolts to the appropriate values.

How do I drive a moving trailer or tow dolly safely?

Driving a towing trailer, just like driving a moving truck, is a new undertaking to most people, and there are certain things you need to know before you can safely drive it. Consider the following:

  • Check your lights: Check the brake and signal lights on the truck or car you are driving as well as the trailer you are towing are functioning well before you start the trip.
  • Adjust your mirrors: Make sure you can see your trailer in your side and maybe rear-view mirrors and regularly check on it to ensure it is not swaying or coming unhooked.
  • Do not drive more than 55mph: When you are towing while driving, moving slower is better, drive defensively, and always maintain your cruise on the slow lane.

Can I tow a trailer with my car?

This depends on your car. In general, some cars are not fit to tow objects. These include:

  • Luxury cars
  • Antique cars
  • Smaller cars like coupes and hatchbacks
  • Electric cars

Google search your type of car to discover if it has tow capability. You can check companies like U-Haul and Penske online for tools that will inform you whether your car has this feature or not.

For long-distance relocations, can I rely on a trailer hitch and how do long-distance movers handle this?

Yes, a trailer hitch is suitable for long-distance moves. Ensure it’s professionally installed to match your vehicle’s towing capacity. Many long-distance movers also offer guidance or services related to safe towing.

Renting a U-Haul trailer 1-way or round trip, which is cheaper?

Your situation will determine the answer to this. For long-distance moves, a 1-way truck rental is a cost-effective option than a round trip.

For instance, you will pay about $269 to rent a 20ft truck from U-Haul to move to Indianapolis from Chicago based on U-Haul’s online estimate. That includes two days of rental and around 221 miles.

Is mileage charged for U-Hail trailers?

U-Haul doesn’t charge mileage for its trailers. Rental rates are subjected to change at any time, so we recommend that you check your reservation immediately to lock in the rate. If you are moving in-town, you must return the trailer to the original pick-up location.

Can a 5’ by 8’ U-Haul trailer accommodate a king-size bed?

A king-sized mattress will fit well in the 6’ by 12’ U-Haul trailer due to the tallness of the mattress. In the United States, this mattress cannot lay flat in the back of a truck.

What is the weight of a 6’ by 12’ trailer?

When empty, the 6’ by 12’ single axle enclosed moving trailer weighs 1,200 pounds; in contrast, an empty 6’ by 12’ tandem axle weighs 1,800 pounds. That additional 600 pounds in a trailer of similar width and height is so much important to consider when checking the quantity your vehicle can transport safely.

Conclusion

We believe that, with the steps discussed in this article, you can choose whether to go for the DIY tow hitch installation or hire a professional tow hitch installer from U-Haul, Pep Boys, or Amazon to handle it for you. Just be sure the hitch is correctly and firmly attached to the vehicle to avoid troubles while on the road.

Recommended Resources

  • Best Moving Companies
  • Best National Moving Companies
  • Best Interstate Moving Companies
  • Best Commercial Movers
  • Best Cross Country Movers

Related Article

  • Cheap Ways To Move Across The Country
  • How to Prepare for a Cross-Country Move
  • How to Pack Your Home For a Cross-Country Move
  • Where Can I Get Moving Labor
  • Where to Get Moving Boxes
  • How Much to Tip Movers?
Top 3 Trailer Hitch Installation Near You | Moving Feedback (2024)
Top Articles
Latest Posts
Article information

Author: Duane Harber

Last Updated:

Views: 6552

Rating: 4 / 5 (71 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Duane Harber

Birthday: 1999-10-17

Address: Apt. 404 9899 Magnolia Roads, Port Royceville, ID 78186

Phone: +186911129794335

Job: Human Hospitality Planner

Hobby: Listening to music, Orienteering, Knapping, Dance, Mountain biking, Fishing, Pottery

Introduction: My name is Duane Harber, I am a modern, clever, handsome, fair, agreeable, inexpensive, beautiful person who loves writing and wants to share my knowledge and understanding with you.